Filter
Top Products
7-8 copyInG
Combine
This feature allows you to copy two one-sided documents to one sheet of Letter-sized
paper.
Document orientation on the ADF
or document glass*
Result image of combined copy
1
1
2
2
* The document glass is available only for the MFX-1350/MFX-1330.
NOTE: • When using the ADF, enlargement copy is not available.
• This machine has no image rotation function.
1
Make sure the machine is in the copy mode.
2
Place your document on the ADF face up or on the document glass face down.
3
To make the combine copy available:
For MFX-1350/MFX-1330
— Press <Combine>. The light above the <Combaine> key
will illuminate, which means the combine key is turned on.
For F-305/F-300 — Press <Advanced Functions> repeatedly until
“Combine”
appears, then press <Enter>. And turn on “Combine” using the cursor key and press
<Enter>.
4
Set the following as needed. (See “Basic copy settings” on page 7-4.)
• Document type and scanning contrast
• Number of copies
• Zoom ratio
(25 to 400% for the document glass, 25 to 100% for the ADF.)
To reset the copy parameter to the default setting, press <Reset>.
5
Press <Start>.
To stop the copying, press <Stop>.