Muratec MFX-C3035 All in One Printer User Manual


 
Status, error and service messages13-38
Error messages
Warning messages
Message Cause Solution
[Unable to collate.]
[Prints one set only.]
There is not enough
space available on the
hard disk for collated
printing.
After one copy is
printed, the error is can-
celed.
[HDD is low on disk
space.]
[Delete unneeded file.]
There is too little
space available on the
hard disk.
Delete downloaded
fonts. Otherwise, initial-
ize the hard disk.
[Replace imaging unit.]
[Replace imaging unit.]
[x]
The time to replace
the imaging unit has
been reached.
Replace the indicated
imaging unit.
[Replace toner (x)]
[Toner empty. Replace
toner and close front door.
x]
The time to replace
the toner cartridge has
been reached.
Replace the indicated
toner cartridge.
[Replace image transfer
belt.]
[Replace transfer belt unit.]
The time to replace
the transfer belt unit
has been reached.
Replace the transfer
belt unit.
After replacing the
transfer belt unit, reset
its counter. For details,
refer to “[Maintenance
Menu]” on page 3-63.
[Replace fusing unit.]
[Replace fusing unit.]
The time to replace
the fuser unit has
been reached.
Replace the fuser unit.
After replacing the fuser
unit, reset its counter.
For details, refer to
“[Maintenance Menu]”
on page 3-63.
[Replace waste toner
box.]
[Prepare new waste toner
box.]
The time to replace
the waste toner bottle
is near.
Prepare the new waste
toner bottle.