Status, error and service messages 13-41
[Toner Cartridge Missing]
[install toner cartridge and
close all doors.]
No toner cartridge is
installed. Otherwise, a
toner cartridge
incompatible with the
machine has been
installed.
Install the correct toner
cartridge.
[Waste Toner Box Full]
[Replace waste toner box
by following the instruc-
tion.]
The waste toner bottle
is full.
Replace the waste
toner bottle.
[Replace Imaging Unit]
[Open front door and
replace imaging unit by
following the instruction.]
The time to replace
the imaging unit has
been reached.
Replace the appropri-
ate imaging unit.
[Replace Toner (x)]
[Replace toner by following
the instruction and close
front door.]
The time to replace
the toner cartridge has
been reached.
Replace the appropri-
ate toner cartridge.
[Paper Size Mismatch]
[Load xxx in Tray x or can-
cel job.]
The paper size speci-
fied from the touch
panel is different from
the size of paper
loaded in the paper
tray.
Load paper of the cor-
rect size into the indi-
cated paper tray.
Otherwise, cancel the
job.
[Paper Setting for Manual
feed]
[Load xx xxxx in bypass
tray. Touch [Print].]
Tray 1 has been
selected for printing.
Press [Print]. Other-
wise, cancel the job.
[Replenish paper]
[Replenish paper or select
other paper tray.]
No other paper tray
contains paper
matching the specified
type and size. (when
[Auto Tray Switching]
is set to [ON])
Load the specified
paper into a paper tray.
[Replenish paper]
[Load paper in bypass tray
or select other paper tray.]
There is no paper in
Tray 1 when printing
with Tray 1 selected.
(when [Auto Tray
Switching] is set to
[OFF])
Load paper into Tray 1.
Message Cause Solution