Filter
Top Products
Advanced Settings
115
N300 Wireless Router WNR2000v4
IPv6 Pass Through
In pass-through mode, the router works as a Layer 2 Ethernet switch with two ports (LAN and
WAN Ethernet ports) for IPv6 packets. The router does not process any IPv6 header
packets.
To set up a pass-through IPv6 Internet connection:
1. Select Advanced >
Advanced Setup > IPv6.
The IPv6 screen displays.
2. Select Pass Through from the menu.
The screen adjusts, but no additional fields display.
3. Click the Apply button.
IPv6 Fixed
To set up an IPv6 Internet connection with a fixed IPv6 address:
1. Select Advanced >
Advanced Setup > IPv6.
The IPv6 screen displays.
2. Select Fixed from the menu.
The screen adjusts:
3. Configure the fixed IPv6 addresses for the WAN connection: