Filter
Top Products
Advanced Settings
87
N300 Wireless Router WNR2000v4
The Wireless Access Point screen displays:
2. Select the Enable Access Point Mode check box.
The screen adjusts.
3. Configure the IP address settings for the router:
• Get dynamically from existing router. By default, the Get dynamically from existing
router radio button is selected, enabling the router to receive its IP address and other
IP settings from the other router or gateway in your network.
• Use fixed IP
Address. Select the Use fixed IP Address radio button to set up static
IP address settings.
NETGEAR does not recommend this setting.
Note: If the other router or gateway in your network also has wireless
capability, NETGEAR recommends that you use wireless settings on
your router that are different from those on the other router or gateway
to avoid interference. You could also disable the wireless radio on the
other router or gateway and use your router only for wireless client
access.
4. Click the Apply button.