Filter
Top Products
genie Advanced Home
50
N300 Wireless Router WNR2000v4
Note: If you change the LAN IP address of the router while connected
through the browser, you are disconnected. If this situation occurs,
you need to open a new connection to the new IP address and log in
again.
To change the LAN settings:
1. Select Advanced > Setup > LAN Setup.
The LAN Setup screen displays:
2. Enter the settings that you want to customize.
These settings are described in the following section, LAN Setup Screen Settings.
3. Click the Apply button.
LAN Setup Screen Settings
The following settings are available on this screen:
LAN TCP/IP Setup
IP Address. The LAN IP address of the router (by default, 192.168.1.1).
IP Subnet Mask.
The LAN subnet mask of the router (by default, 255.255.255.0). Combined
with the IP address, the IP subnet mask allows a device to know which other addresses are
local to it, and which have to be reached through a gateway or router.
RIP Direction. Router Information Protocol (RIP) enables a router to exchange routing
information with other routers.
This setting controls how the router sends and receives RIP