Filter
Top Products
Administration
77
N300 Wireless Router WNR2000v4
The Logs screen shows the following information:
Date and time. The date and time the log entry was recorded.
Source IP. The IP address of the initiating device for this log entry.
Target address. The name or IP address of the website or news group that users visited or
attempted to access, or the IP address from which a DoS or port scan was initiated, from
which time was synchronized, or in relation to which other actions occurred.
Action. The action that occurred.
To refresh the log screen, click the Refresh button.
To clear the log entries, click the Clear Log button.
To email the log immediately, click the Send Log button.
To configure which actions are logged:
1. On the Logs screen, select any of the following check boxes:
• Attempted access to allowed sites. Log attempts to access websites that are
allowed.
• Attempted access to blocked sites and services. Log attempts to access websites
and services that are blocked.
• Connections to the Web-based interface of this Router. Log access to the router
user interface.
• Router operation (startup, get time etc). Log router operation events such as
startup, Internet connection, firmware initialization, and time synchronization.
• Known DoS attacks and Port Scans. Log DoS attacks and port scans.
• Port Forwarding / Port Triggering. Log port forwarding and port triggering events.
• Wireless access. Log access by wireless clients.
• Turn off wireless signal by schedule. Log when the radio is turned off if the
wireless signal is scheduled to be turned off.
2. Click the Apply button.
Manage the Configuration File
The configuration settings of the router are stored within the router in a configuration file. You
can back up (save) this file to your computer, restore it, or reset it to the factory default
settings.
Back Up Settings
To back up the router’s configuration settings:
1. Select Advanced > Administration > Backup Settings.