Filter
Top Products
genie Basic Settings
31
N300 Wireless Router WNR2000v4
WPA/WPA2 Enterprise
This security option is not for home use but is typically used in a business or enterprise.
WPA/WPA2 Enterprise does not use a passphrase but supports 802.1x authentication, which
requires an internal or external RADIUS server. A Remote Authentication Dial In User
Service (RADIUS) server provides Authentication, Authorization, and Accounting (AAA)
management to grant (or deny) computers access to your wireless network.
WPA/WPA2 Enterprise can support WPA [TKIP] for WPA clients only, WPA2 [AES] for WPA2
clients only
, and WPA [TKIP] + WPA2 [AES], which is a combination of TKIP and AES
encryption for both WPA and WPA2 clients. WPA clients are supported at speeds of up to
54 Mbps only. WPA2 clients are supported at speeds of up 300 Mbps.
WPA/WPA2 Enterprise supports five Extensible Authentication Protocol (EAP) authentication
methods: EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC,
and EAP-SIM.
To configure WPA/WPA2 Enterprise security:
1. In the Security Options sections of the Wireless Settings screen, select the WP
A/WPA2
Enterprise radio button.
2. Select the WPA mode (WPA [TKIP], WPA2 [AES], or WPA [TKIP] + WPA2 [AES]).
3. T
ype the IP address of the RADIUS server.
The address can be on your LAN on it can be an external address.
4. Enter the port number for the RADIUS server in the range from 1 to 65535 (the default
number is 1812).
5. T
ype the shared secret, which needs to be between 1 and 128 characters (the default
value is blank).
The shared secret is case-sensitive.
6. Click the Apply button.
WEP
Wired Equivalent Privacy (WEP) security is an authentication and data encryption mode that
has been superseded by WPA-PSK and WPA2-PSK. WEP supports speeds of up to 54 Mbps