Filter
Top Products
109
Configure
For Netopia VGx technology models, separate Ethernet switch ports are displayed and
may be configured.
To enable any of them on this VLAN, select one, and click the
Add
button.
Typically you will choose a physical port, such as an Ethernet port (example: ethernet1)
or a wireless SSID (example: ssid1), and make the port routable by specifying lan-
uplink.
• When you are finished, click the Alert icon in the upper right-hand corner of the screen,
and in the resulting screen, click the
Save
link.
• If you want to create more VLANs, click the
Advanced
link (in the left-hand toolbar)
and then the
VLAN
link in the resulting page, and repeat the process.
• When you are finished, click the Alert icon in the upper right-hand corner of the screen,
and in the resulting screen, click the
Save and Restart
link.
☛ Note:
To make a set of VLANs non-routable, the lan-uplink port must be included in
at least one VLAN. It must then be excluded from any VLANs that are non-
routable.