Filter
Top Products
282
SNMP Settings
The Simple Network Management Protocol (SNMP) lets a network administrator monitor
problems on a network by retrieving settings on remote network devices. The network
administrator typically runs an SNMP management station program on a local host to
obtain information from an SNMP agent such as the Netopia Gateway.
set snmp community read
name
Adds the specified name to the list of communities associated with the Netopia Gateway.
By default, the Netopia Gateway is associated with the public community.
set snmp community write
name
Adds the specified name to the list of communities associated with the Netopia Gateway.
set snmp community trap
name
Adds the specified name to the list of communities associated with the Netopia Gateway.
set snmp trap ip-traps
ip-address
Identifies the destination for SNMP trap messages. The
ip-address
argument is the IP
address of the host acting as an SNMP console.
set snmp sysgroup contact
contact_info
Identifies the system contact, such as the name, phone number, beeper number, or email
address of the person responsible for the Netopia Gateway. You can enter up to 255 char-
acters for the
contact_info
argument. You must put the
contact_info
argument in
double-quotes if it contains embedded spaces.
set snmp sysgroup location
location_info
Identifies the location, such as the building, floor, or room number, of the Netopia Gateway.
You can enter up to 255 characters for the
location_info
argument. You must put the
location_info
argument in double-quotes if it contains embedded spaces.