Filter
Top Products
134
3. Be sure that you have SafeHarbour VPN enabled.
SafeHarbour is a keyed feature. See “Install Keys” on page 184. for information con-
cerning installing Netopia Software Feature Keys.
4. Check the
Enable SafeHarbour IPSec
checkbox.
Checking this box will automatically display the SafeHarbour IPSec Tunnel Entry
parameters.
Enter the initial group of tunnel parameters. Refer to your Setup Worksheet and the
“Parameter Descriptions” on page 136 as required.
5. Enter the tunnel
Name
.
This is the only parameter that does not have to match the peer/remote VPN device.
6. Enter the
Peer External IP Address
.
7. Select the
Encryption Protocol
from the pull-down menu.
8. Select the
Authentication Protocol
from the pull-down menu.
9. Click
Add
.
The Tunnel Details page appears.