Filter
Top Products
226
The only commands you cannot truncate are
restart
and
clear
. To prevent accidental
interruption of communications, you must enter the
restart
and
clear
commands in their
entirety.
You can use the Up and Down arrow keys to scroll backward and forward through recent
commands you have entered. Alternatively, you can use the
!!
command to repeat the last
command you entered.
SHELL Commands
Common Commands
arp
nnn.nnn.nnn.nnn
Sends an Address Resolution Protocol (ARP) request to match the
nnn.nnn.nnn.nnn
IP
address to an Ethernet hardware address.
clear [yes]
Clears the configuration settings in a Netopia Gateway. If you do not use the optional yes
qualifier, you are prompted to confirm the clear command.
clear_certificate
Removes an SSL certificate that has been installed.
clear_log
Erases the log information stored in flash if persistent logging is enabled.
configure
Puts the command line interface into Configure mode, which lets you configure your Neto-
pia Gateway with Config commands. Config commands are described starting on page
223.