Filter
Top Products
230
• The
-c
count
argument lets you specify the number of ICMP packets generated for the
ping request. Values greater than 250 are truncated to 250.
You can use the ping command to determine whether a hostname or IP address is
already in use on your network. You cannot use the ping command to ping the Netopia
Gateway’s own IP address.
quit
Exits the Netopia Gateway command line interface.
reset arp
Clears the Address Resolution Protocol (ARP) cache on your unit.
reset atm
Resets the Asynchronous Transfer Mode (ATM) statistics.
reset crash
Clears crash-dump information, which identifies the contents of the Netopia Gateway regis-
ters at the point of system malfunction.
reset dhcp server
Clears the DHCP lease table in the Netopia Gateway.
reset diffserv
Resets the Differentiated Services (diffserv) statistics.
reset enet
Resets Ethernet statistics to zero
reset heartbeat
Restarts the heartbeat sequence.