Filter
Top Products
262
IPMaps Settings
set ip-maps name <
name
> internal-ip <
ip address
>
Specifies the name and static ip address of the LAN device to be mapped.
set ip-maps name <
name
> external-ip <
ip address
>
Specifies the name and static ip address of the WAN device to be mapped.
Up to 8 mapped static IP addresses are supported.
Network Address Translation (NAT) Default Settings
NAT default settings let you specify whether you want your Netopia Gateway to forward NAT
traffic to a default server when it doesn’t know what else to do with it. The NAT default host
function is useful in situations where you cannot create a specific NAT pinhole for a traffic
stream because you cannot anticipate what port number an application might use. For
example, some network games select arbitrary port numbers when a connection is being
opened. By identifying your computer (or another host on your network) as a NAT default
server, you can specify that NAT traffic that would otherwise be discarded by the Netopia
Gateway should be directed to a specific hosts.
set nat-default mode [ off | default-server | ip-passthrough ]
Specifies whether you want your Netopia Gateway to forward unsolicited traffic from the
WAN to a default server or an IP passthrough host when it doesn’t know what else to do
with it. See “Default Server” on page 85 for more information.
set nat-default dhcp-enable [ on | off ]
Allows the IP passthrough host to acquire its IP address via DHCP, if ip-passthrough is
enabled.
set nat-default address
ip_address
Specifies the IP address of the NAT default server.