Filter
Top Products
169
Working with IP Filters and Filter Sets
If Protocol Type is set to TCP or UDP, the settings for port comparison will appear.
These settings only take effect if the Protocol Type is TCP or UDP.
9. From the
Source Port Compare
pull-down menu, choose a comparison
method for the filter to use on a packet’s source port number.
Then select
Source Port
and enter the actual source port number to match on (see
the table on page 158).
10. From the Destination Port Compare pull-down menu, choose a compari-
son method for the filter to use on a packet’s destination port number.
Then select
Destination Port
and enter the actual destination port number to match
on (see the table on page 158).
11. When you are finished configuring the filter, click the
Submit
button to
save the filter in the filter set.
Viewing filters
To display the table of input or output filters, select the Filter Set Name in the Filter Set
page and click the
Add
or
Edit
button.
The table of filters in the filtersets appears.