Filter
Top Products
95
Configure
Link: SNMP
When you click the
SNMP
link, the SNMP configuration page appears.
The Simple Network Management Protocol (SNMP) lets a network administrator monitor
problems on a network by retrieving settings on remote network devices. The network
administrator typically runs an SNMP management station program on a local host to
obtain information from an SNMP agent. In this case, the Netopia Gateway is an SNMP
agent. Your Gateway supports SNMP-V1, with the exception of most sets (read-only and
traps), and SNMP-V2. (For certain parts of the NPAV2TRAP.MIB – parameters under resNat-
Params, resDslParams, resSecParams – set is supported.)
You enter SNMP configuration information on this page. Your network administrator fur-
nishes the SNMP parameters.