Filter
Top Products
235
SHELL Commands
telnet {
hostname
|
ip_address
} [
port
]
Lets you open a telnet connection to the specified host through your Netopia Gateway.
• The
hostname
argument is the name of the device to which you want to connect; for
example,
telnet ftp.netopia.com
.
• The
ip_address
argument is the IP address, in dotted decimal notation, of the device
to which you want to connect.
• The
port
argument is the number of t he port over which you want to open a telnet
session.
traceroute (
ip_address
|
hostname
)
Traces the routing path to an IP destination.
upload [
server_address
] [
filename
] [confirm]
Copies the current configuration settings of the Netopia Gateway to a TFTP (Trivial File
Transfer Protocol) server. The TFTP server must be accessible on your Ethernet network.
The
server_address
argument identifies the IP address of the TFTP server on which you
want to store the Netopia Gateway settings. The
filename
argument identifies the path
and name of the configuration file on the TFTP server. If you include the optional confirm
keyword, you will not be prompted to confirm whether or not you want to perform the oper-
ation.
view config
Dumps the Netopia Gateway’s configuration just as the view command does in config
mode.
who
Displays the names of the current shell and PPP users.