Filter
Top Products
278
set security state-insp xposed-addr
exposed-address# "
n
" start-port [ 1 - 65535 ]
set security state-insp xposed-addr
exposed-address# "
n
" end-port [ 1 - 65535 ]
Packet Filtering Settings
Packet Filtering settings are supported beginning with Firmware Version 7.4.
Packet Filtering has two parts:
• Create/Edit/Delete Filter Sets, create/edit/delete rules to a Filter Set.
• Associate a created Filter Set with a WAN or LAN interface
See “Packet Filter” on page 154 for more information.
set security pkt-filter filterset
filterset-name
[ in | out ]
index
forward [ on | off ]
Creates or edits a filter rule, specifying whether packets will be forwarded or not.
☛ NOTE:
If this is the first rule, it will create the filter-set called filterset-name, other-
wise it will edit the filterset.
If the index is not consecutive, the system will select the next consecutive
index. If the index does not exist, a rule will be created. If a rule exists, the
rule will be edited.
set security pkt-filter filterset
filterset-name
[ in | out ]
index
idle-reset [ on | off ]
Turns idle reset on or off for the specified filter rule. A match on this rule resets idle-time-
out status and keeps the WAN connection alive. The default is off.