Filter
Top Products
79
Configure
Pinhole Configuration Procedure. Use the following steps:
1. From the
Configure
toolbar button ->
Advanced
link, select the
Internal
Servers
link.
Since Port Forwarding is required for this example, the Netopia embedded Web server
is configured first.
☛ NOTE:
The two text boxes, Web (HTTP) Server Port and Telnet Server Port, on this
page refer to the port numbers of the Netopia Gateway’s embedded admin-
istration ports.
To pass Web traffic through to your LAN station(s), select a Web (HTTP) Port number that is
greater than 1024. In this example, you choose 8100.
2. Type
8100
in the Web (HTTP) Server Port text box.
3. Click the
Submit
button.
4. Click
Advanced
. Select the
Pinholes
link to go to the Pinhole page.