Filter
Top Products
8-16 User’s Reference Guide
Console Configuration
You can change the default terminal communications parameters to suit your requirements.
To go to the Console Configuration screen, select Console Configuration in the System Configuration screen.
Follow these steps to change a parameter’s value:
1. Select the parameter you want to change.
2. Select a new value for the parameter. Return to step 1 if you want to configure another parameter.
3. Select SET CONFIG NOW to save the new parameter settings. Select CANCEL to leave the parameters
unchanged and exit the Console Configuration screen.
SNMP (Simple Network Management Protocol)
These screens allow you to monitor and configure your network by means of a standard Simple Network
Management Protocol (SNMP) agent.
■ Details are given in “SNMP” on page 14-12.
Security
These screens allow you to add users and define passwords on your network.
■ Details are given in “Security” on page 15-1.
Upgrade Feature Set
You can upgrade your Netopia R3100 by adding new feature sets through the Upgrade Feature Set utility.
Console Configuration
Baud Rate... 9600
Hardware Flow Control: No
SET CONFIG NOW CANCEL