Filter
Top Products
IP Setup and Network Address Translation 11-17
To go to the IP Address Serving screen, select IP Address Serving in the System Configuration screen and
press Return.
Follow these steps to configure IP Address Serving:
■ If you enabled IP Address Serving either by using SmartStart or in Easy Setup, DHCP, BootP clients,
Dynamic WAN clients, and MacIP/KIP clients (if you have the AppleTalk kit installed) are automatically
enabled.
■ Select Number of Client IP Addresses and enter the total number of contiguous IP addresses that the
Netopia R3100 will distribute to the client machines on your local area network.
■ In the screen example shown above, five Client IP addresses have been allocated.
■ Select 1st Client Address and enter the first client IP address that you will allocate to your first client
machine. For instance, on your local area network you may first want to figure out what machines are going
to be allocated specific static IP addresses so that you can determine the pool of IP addresses that you will
be serving addresses from via DHCP, BOOTP, Dynamic WAN, and/or MacIP.
Note: On a Netopia R3100 the factory default IP Address serving settings are:
1st Client Address: 192.168.1.3
Number of Client IP Addresses: unlimited models:100; limited models: number of users minus 1
(this allows for one static address at 192.168.1.2 for the server)
■ Example: Your ISP has given your Netopia R3100 the IP address 192.168.6.137, with a subnet mask of
255.255.255.248. The subnet mask allocated will give you six IP addresses to use when connecting to the
ISP over the Internet (for more information on understanding IP addressing refer to Appendix E,
“Understanding IP Addressing.”). Your address range will be from .137-.143. In this example you would
enter 192.168.6.138 as the 1st client address, as the router itself must have an IP address.
■ To enable DHCP, select Serve DHCP Clients and toggle it to Yes. DHCP serving is automatic when IP
IP Address Serving
Number of Client IP Addresses: 5
1st Client Address: 163.176.56.90
Serve DHCP Clients: Yes
DHCP NetBios Options...
Serve BOOTP Clients: Yes
Serve Dynamic WAN Clients Yes
Serve MacIP/KIP Clients: Yes
MacIP/KIP Static Options...
Configure DHCP, BOOTP, WAN IP, and/or MacIP Address Serving here.