Filter
Top Products
2-2 User’s Reference Guide
Acrobat® Reader for Windows and Macintosh, ZTerm terminal emulator software and NCSA Telnet 2.6 for
Macintosh
You will need:
■ A Windows 95, 98, or NT-based PC or a Macintosh with Ethernet connectivity for configuring the Netopia
R3100. This may be built-in Ethernet or an add-on card, with TCP/IP installed.
■ An ISDN telephone line.
Identify the connectors and attach the cables
Identify the connectors and switches on the back panel and attach the necessary Netopia Router cables.
1. Connect one of the RJ-45 cables to any of the Ethernet ports on the router.
(If you are connecting the router to an existing Ethernet hub, use Ethernet port #1 on the router and set the
crossover switch to the Uplink position.)
2. Connect one end of one of the RJ-45 cables to the “Telco 1" or “Line 1" port, and the other end to your wall
outlet.
3. Connect the mini-DIN8 connector from the Power Adapter to the Power port, and plug the other end into an
electrical outlet.
You should now have: the power adapter plugged in; the Ethernet cable connected between the router and
your computer; and the telephone cables connected between the router and the wall outlets.
4. Insert your Netopia CD and follow the instructions to install an Internet browser and the Adobe Acrobat
Reader, if you don’t already have them.
Phone
Ports
Phone 2
Phone 1
A
u
x
ilia
ry
Normal/Uplink
8765
4321
E
th
e
rn
e
t
1
C
o
n
s
o
le
P
o
w
e
r
T
e
lc
o
1
T
e
lc
o
2
1 Ethernet
2 Telco
3 Power