Filter
Top Products
11-4 User’s Reference Guide
Profile screen. You access the Address Translation option from the IP Profile Parameters menu.
Select the Local WAN IP Address field. The default address is 0.0.0.0, which allows for dynamic
addressing, meaning that your ISP assigns an address each time you connect. However, if you want to use
static addressing you may enter a specific address.
4. When your Netopia R3100 connects to the ISP, the remote router assigns your Netopia R3100 an IP
address that external users use to communicate with your network.
The following Quick View screen shows an example where 192.163.100.6 is assigned to the calling
Netopia R3100. “NAT” indicates that the address was assigned dynamically by Network Address
Translation.
IP Profile Parameters
Address Translation Enabled: Yes
Local WAN IP Address: 0.0.0.0
Remote IP Address: 0.0.0.0
Remote IP Mask: 255.0.0.0
Filter Set...
Remove Filter Set
Receive RIP: Off
Configure IP requirements for a remote network connection here.
Quick View 9/3/1998 01:52:29 PM
Default IP Gateway: 0.0.0.0 CPU Load: 7% Unused Memory: 612 KB
Domain Name Server: 192.168.1.10 Call Acct: Disabled
Domain Name: None Provided
----------------MAC Address--------IP Address-------IPX Address---EtherTalk---
Ethernet Hub: 00-00-c5-70-03-48 192.168.1.1 34449:150
Current WAN Connection Status
Profile Name----------Rate--%Use-Remote Address-----Est.-More Info------------
ISP P1 10% IP 92.163.4.1 Lcl NAT 192.163.100.6
LED Status
PWR-+-----WAN1------+--CON--AUX--+-----WAN2------+--EN--+--------LEDS---------
LNK RDY CH1 Ch2 LNK LNK LNK RDY CH1 CH2 DATA | '-'= Off 'G'= Green
G - - - - - - - - - - Y | 'R'= Red 'Y'= Yellow