Filter
Top Products
ES 3037/3037e Setting up • 59
Color Menu
The default settings are bold.
Item Value Description
AUTO DENSITY
MODE
Auto; Manual. Select whether density adjustment
and Toner Response Curve (TRC)
compensation is automatic.
Auto
: Density adjustment is
automatically run under specified
conditions, and reflected in the TRC
compensation.
Manual
: Density adjustment is done
manually (see page 83).
ADJUST DENSITY
Execute If EXECUTE is selected, the printer
will immediately adjust density and
reflect it in the TRC compensation.
Density adjustment must be
executed when the printer is idling. It
may become invalid if executed in
any other state.
COLOR TUNING
Print pattern Prints the pattern for the user to
manually adjust TRC. Ordinarily this
function is not needed because TRC
is automatically adjusted. This
function permits TRC adjustment to
your requirement by using the
adjustment menu of HIGHLIGHT,
MID-TONE, and DARK for each of
CMYK. See page 83.
CYAN, MAGENTA,
YELLOW OR
BLACK
HIGHLIGHT
0+1+2+3-3-2-1 Adjusts HIGHLIGHT (light area) of
Cyan, Magenta, Yellow or Black
TRC.
Plus indicates adjustment toward a
darker level and minus toward
lighter.
CYAN, MAGENTA,
YELLOW OR
BLACK MID-TONE
0+1+2+3-3-2-1 Adjusts MID-TONE of Cyan,
Magenta, Yellow or Black TRC.
Plus indicates adjustment toward a
darker level and minus toward
lighter.
CYAN, MAGENTA,
YELLOW OR
BLACK DARK
0+1+2+3-3-2-1 Adjusts DARK of Cyan, Magenta,
Yellow or Black TRC.
Plus indicates adjustment toward a
darker level and minus toward
lighter.