Filter
Top Products
ES 3037/3037e Setting up • 72
Network menu
Only appears if the network card is installed.
The default settings are bold.
Item Value Description
TCP/IP
Enable; Disable Selects TCP/IP protocol.
NETWARE
Enable; Disable Selects Netware protocol.
ETHERTALK
Enable; Disable Selects EtherTalk protocol.
NETBEUI
Enable; Disable Selects NetBEUI protocol.
FRAME TYPE
Auto; 802.2; 802.3
Ether-II; Snap
Selects Ethernet frame type.
DHCP/BOOTP
Enable; Disable Selects whether selection of DHCP/
BOOP is automatic.
RARP
Enable; Disable Selects whether selection of RARP is
automatic.
IP ADDRESS
xxx.xxx.xxx.xxx Configures IP address of 12
alphanumeric characters.
SUBNET MASK
xxx.xxx.xxx.xxx Configures subnet mask of 12
alphanumeric characters.
GATEWAY
ADDRESS
xxx.xxx.xxx.xxx Configures gateway address of 12
alphanumeric characters.
PRINT
SETTINGS
ON; OFF Selects printing of network menu
map.
INITIALIZE
ON; OFF Selects network initialization.
Memory menu
The default settings are bold.
Item Value Description
RECEIVE BUFF
SIZE
Auto; OFF; 0.5 MB;
1 MB; 2 MB; 4 MB; 8
MB; 16 MB; 32 MB
Sets the size of the receive buffer
and depends on the amount of
memory installed in the printer.
RESOURCE
SAVE
AUTO; Off; 0.5 MB;
1 MB; 2 MB; 4 MB; 8
MB; 16 MB; 32 MB
Set the size of the font cache area
and depends on the amount of
memory installed in the printer.
FLASH
INITIALIZE
Execute Initializes flash memory if installed.