TROUBLESHOOTING > 172
DISK FILE OPERATION
FAILED
Error with hard disk operations.
DISK FILESYSTEM IS FULL
Hard disk/flash memory full.
DISK FULL
The internal hard drive is full.
EEPROM INITIALIZE ERROR
Call for service.
EMPTY
Indicates which paper tray is empty.
ERROR POSTSCRIPT
A PostScript error has occurred.
FATAL ERROR
Call for service.
FUSER UNIT MISSING
Fuser unit is missing.
INSTALL ADDITIONAL
MEMORY
Additional memory is required before job can be
printed.
INSTALL NEW IMAGE DRUM
Install a new image drum. Colour will be indicated.
INSTALL NEW TONER
Install a new toner cartridge. Colour will be indicated.
INSTALL PAPER CASSETTE
Install the paper cassette. Paper tray will be indicated.
INVALID DATA
Data is incorrect.
LOAD
Load correct paper size/type. Size/type will be
indicated.
MEDIA MISMATCH
Paper type set via menu does not match that sent via
driver.
NEAR END
The paper in the selected ***** is nearly finished (*****
indicates paper tray).
NETWORK ERROR
Network error.
OFFLINE
Shows off-line status.
ONLINE
Shows on-line status.
OPEN UPPER COVER
Open the upper cover.
PLEASE POWER OFF
Printer must be switched off after disk/flash
initialisation.
POWER SAVE
The printer is in powersave mode.
PRINTING
Data is being printed.
PROCESSING
Data is being processed.
RAM CHECK
RAM is being checked after switching printer on.
REGISTRATION ADJUST TEST
Registration adjustment being tested.
REGISTRATION ERROR
An error has occurred setting up the registration.
REMOVE THE PAPER
Indicates wrong paper being used.
RS232C FRAMING ERROR
Serial framing error. Check configuration of serial card.
LCD Message Meaning