Filter
Top Products
SETTING UP > 65
USB MENU
Enable/Disable Enable/Disable USB MENU.
Set to Disable, USB MENU is not displayed.
IEEE 1394 MENU
Enable/Disable Displayed only when the IEEE 1394 board is
fitted.
Enable/Disable IEEE 1394 MENU.
Set to Disable, IEEE 1394 MENU is not
displayed.
NETWORK MENU
Enable/Disable Displayed only when the Network Interface
Card is fitted.
Enable/Disable NETWORK MENU.
Set to Disable, NETWORK MENU is not
displayed.
MEMORY MENU
Enable/Disable Enable/Disable MEMORY MENU.
Set to Disable, MEMORY MENU is not
displayed.
DISK
MAINTENANCE
Enable/Disable Enable/Disable DISK MAINTENANCE MENU.
Set to Disable, DISK MAINTENANCE MENU is
not displayed.
SYSTEM ADJUST
MENU
Enable/Disable Enable/Disable SYSTEM ADJUST MENU.
Set to Disable, SYSTEM ADJUST MENU is not
displayed.
MAINTENANCE
MENU
Enable/Disable Enable/Disable MAINTENANCE MENU.
Set to Disable, MAINTENANCE MENU is not
displayed.
USAGE MENU
Enable/Disable Enable/Disable USAGE MENU.
Set to Disable, USAGE MENU is not displayed.
COLOUR MENU
Execute This is the menu to reset the TRC data that had
been stored (retained for tracking).
For example, correct values could not be taken
due to “out of order” situation.
This is mainly for maintenance purposes and
not ordinarily used.
BLOCK DEVICE
MENU
Initialise lock -
YES
NO
Enable/Disable setting changes that involve
Block Device (HDD, FLASH) initialisation.
If set to YES, the operator panel does not
show FLASH INITIALISE ITEM and PS FLASH
RESIZE ITEM in DISK MAINTENANCE and
MEMORY MENU.
PEAK POWER
CONTROL
Normal/Low Sets PEAK POWER CONTROL.
Item Value Description