SETTING UP > 49
Colour menu
Item Value Description
AUTO DENSITY
MODE
Auto; Manual Select whether density adjustment
and Toner Response Curve (TRC)
compensation is automatic.
Auto: Density adjustment is
automatically run under specified
conditions, and reflected in the TRC
compensation.
Manual: The printer does not
voluntarily run density adjustment.
ADJUST DENSITY
Execute If EXECUTE is selected, the printer will
immediately adjust density and reflect
it in the TRC compensation. Density
adjustment must be executed when
the printer is idling. It may become
invalid if executed in any other state.
COLOUR TUNING
Print pattern Prints the pattern for the user to adjust
TRC. Ordinarily this function is not
needed because TRC is automatically
adjusted to the recommended levels
through density adjustment and TRC
compensation. This function permits
TRC adjustment to your requirement by
using the adjustment menu of
HIGHLIGHT, MID-TONE, and DARK for
each of CMYK. Adjustment results will
be reflected as offset values (addition)
to the corrections made through the
Adjust Density/TRC Compensation
function.
CYAN, MAGENTA,
YELLOW OR BLACK
HIGHLIGHT
0+1+2+3-3-2-1 Adjusts HIGHLIGHT (light area) of Cyan,
Magenta, Yellow or Black TRC.
Plus indicates adjustment toward a
darker level and minus toward lighter.
CYAN, MAGENTA,
YELLOW OR BLACK
MID-TONE
0+1+2+3-3-2-1 Adjusts MID-TONE of Cyan, Magenta,
Yellow or BlackTRC.
Plus indicates adjustment toward a
darker level and minus toward lighter.
CYAN, MAGENTA,
YELLOW OR BLACK
DARK
0+1+2+3-3-2-1 Adjusts DARK of Cyan, Magenta, Yellow
or Black TRC.
Plus indicates adjustment toward a
darker level and minus toward lighter.