Filter
Top Products
TROUBLESHOOTING > 192
PRINTER TAKES A LONG TIME TO START PRINTING.
TONER RUBS OFF WHEN YOU RUB THE PRINTED SURFACE.
Possible cause Remedy
The printer has to warm up
returning from power save
mode.
In the printer menu settings, set power save to a higher
value to increase the length of time before entering
power save mode.
The image drum carries out
a cleaning process to ensure
print quality, which takes
time.
Wait until this process has been completed.
The fuser unit adjusts
temperature, which takes
time.
Wait until this process has been completed.
The printer is processing
data from another interface.
Wait until this data is processed.
Possible cause Remedy
Media Weight and Media
Type settings may not be
appropriate.
Set the value of media weight to the next heaviest one.