Oki 7100 Printer User Manual


 
SETTING UP > 54
PPR Emulation
Item Value Description
PEN WIDTH
ADJUST
ON; OFF IN PCL, when switched ON,
emphasises the pen width to improve
the appearance of lines specified with
minimum width.
CHARACTER PITCH
10 CPI; 12 CPI; 17 CPI;
20 CPI; PROPORTIONAL
Specifies character pitch in IBM PPR
emulation.
FONT CONDENSE
12CPI - 20CPI; 12CPI -
12CPI
Specifies 12CPI pitch for Condense
Mode.
CHARACTER SET
Set 1; Set 2 Specifies a character set.
SYMBOL SET
IBM 437 Specifies a symbol set.
LETTER 0 STYLE
Disable; Enable Specifies the style that replaces 9BH
with letter o and 9DH with a zero
ZERO CHARACTER
Normal; Slashed Sets the zero to be slashed or
unslashed.
LINE PITCH
6 LPI; 8 LPI Specifies the line spacing.
WHITE PAGE SKIP
OFF; ON Specifies whether or not the printer
ejects a blank sheet.
Not available on duplex operation.
CR FUNCTION
CR; CR+LF Sets functionality on receipt of CR
code.
LF FUNCTION
LF; LF+CR Sets functionality on receipt of LF
code.
LINE LENGTH
80 COLUMN; 136
COLUMN
Specifies the number of characters
per line.
FORM LENGTH
11 INCH; 11.7 INCH;
12 INCH
Specifies the length of paper.
TOF POSITION
0.0 INCH - 1.0 INCH Specifies the distance of print from
the top edge of the paper.
LEFT MARGIN
0.0 INCH - 1.0 INCH Specifies the distance of print from
the left hand edge of the paper.
FIT TO LETTER
Disable; Enable Sets the printing mode that can fit
print data, equivalent to 11 inches (66
lines), in the LETTER-size printable
area.
TEXT HEIGHT
Same; Diff Sets the height of a character.
SAME: Regardless of CPI, same height
DIFF: As CPI, character heights vary.