SETTING UP > 53
PCL emulation
Item Value Description
FONT SOURCE
Resident; Dimmo;
Downloaded
Selects location of the PCL font used.
Dimmo is displayed only when font
DIMM ROM exists in the slot.
Downloaded only appears if fonts
have been down loaded to the printer.
FONT NO.
I000 to 1083 Sets the PCL font number.
The range of this variable changes
depending on the FONT SOURCE
setting at the time. If the default font
is set for FONT SOURCE, the number
starts at 0. If it is not, the number
starts at 1. The maximum value is
equal to the number of fonts installed
in FONT SOURCE.
FONT PITCH
0.44 cpi to 99.99 cpi
(10.00 cpi)
Sets the font width in characters per
inch. Only displayed if the font is a
fixed spacing outline font.
FONT HEIGHT
4.00 pt to 999.75 pt
(12.00 pt)
Sets the font point size. Only
displayed if the font is a relative
spacing outline font.
SYMBOL SET
PC-8 Selects a PCL character symbol set.
A4 PRINT WIDTH
78 column; 80 column Selects the number of characters in a
line before automatic return
(A4paper), PCL mode.
WHITE PAGE SKIP
OFF; ON Selects whether or not to print pages
that contain no data (white pages),
PCL mode.
CR FUNCTION
CR; CR+LF Sets functionality on receipt of CR
code in PCL mode.
LF FUNCTION
LF; LF+CR Sets functionality on receipt of LF code
in PCL mode.
PRINT MARGIN
Normal; 1/5 inch; 1/6
inch
Sets unprintable paper area (margin).
Normal: PCL emulation compatible
1/5 inch: domestic model emulation.
1/6 inch: HIPER-W emulation.
TRUE BLACK
ON; OFF PCL: Sets whether to use Composite
Black (CMYK mixed) or Pure Black (K
only) for the black (100%) in image
data. OFF: Mode using Composite
Black ON: Mode using Pure Black (not
valid with PostScript).