Filter
Top Products
SETTING UP > 56
HP-GL/2 Emulation
Item Value Description
PEN 0 - 15 WIDTH
0.0 - 12.0 mm
Pen 0: 0.13 mm
Pen 1: 0.18 mm
Pen 2: 0.25 mm
Pen 3: 0.35 mm
Pen 4: 0.50 mm
Pen 5: 0.65 mm
Pen 6: 0.70 mm
Pen 7: 0.80 mm
Pen 8: 0.90 mm
Pen 9: 1.0 mm
Pen 10: 1.4 mm
Pen 11: 2.0 mm
Pen 12: 3.0 mm
Pen 13: 5.0 mm
Pen 14: 8.0 mm
Pen 15: 12.0 mm
Specifies the width of Pen 0 - 15 for
the menu palette to be used in GL/2
drawings.
The specified width is invalid if
PALETTE is not selected as PALETTE
SOURCE, and the default pen width in
this case is 0.35mm.
This will not affect GL/2 mode in PCL.
PEN 0 - 15
COLOUR
0.0 - 12.0 mm
Pen 0: 0
Pen 1: 1
Pen 2: 2
Pen 3: 3
Pen 4: 4
Pen 5: 5
Pen 6: 6
Pen 7: 7
Pen 8: 8
Pen 9: 12
Pen 10: 19
Pen 11: 27 mm
Pen 12: 35 mm
Pen 13: 68 mm
Pen 14: 100mm
Pen 15: 255 mm
Specifies the colour of Pen 0 - 15 for
the menu palette to be used in GL/2
drawings.
The specified colour is invalid if
PALETTE is not selected as PALETTE
SOURCE.
This will not affect GL/2 mode in PCL.
ORIGIN
Corner
Centre
Specifies the origin in GL/2 drawings.
This will not affect GL/2 in PCL.
(The origin in GL/2 mode in PCL is in
the lower-left corner.)
PEN 0 FUNCTION
White pen
End plot
Specifies the designation of Pen 0 in
GL/2 drawings. If END PLOT is set, the
command to select PEN 0 will prompt
printing, then ejecting.
This will not affect GL/2 mode in PCL.