Oki 7100 Printer User Manual


 
SETTING UP > 51
System configuration menu
CMY 100% DENSITY
Disable; enable Selects enable/disable 100% output
against the CMY100% TRC
compensation. Ordinarily, the TRC
compensation function controls the
appropriate print density; thus, 100%
output is not always enabled.
Selecting ENABLE will allow 100%
output. In actual printing, the TCR
values, too, are controlled by Colour
Matching. This function is used for
special purposes; for example, to
specify the colour for CMYK colour
space in PS.
Item Value Description
POWER SAVE
DELAY TIME
5 min; 15 min; 30 min;
60 min; 240 min.
Sets the time before printer enters
power save mode.
PERSONALITY
Auto emulation; PCL;
IBM PPR III XL; Epson
FX; Adobe PostScript;
HP-GL2
Selects the printer emulation
language. Note: the only printer
languages that can be selected are
those enabled in the Personality
section of the Maintenance menu.
USB
PS-PROTOCOL
ASCII
RAW
Specifies PostScript (PS)
communication protocol mode of data
from USB. (In RAW mode, Ctrl-T is
invalid.)
IEEE 1394
PS PROTOCOL
ASCII
RAW
Displayed only when IEEE1394 option
board is installed.
Specifies PS communication mode of
data from IEEE1394.
(In RAW mode, Ctrl-T is invalid).
NETWORK
PS PROTOCOL
ASCII
RAW
Displayed this Item when OkiLAN
7300e is installed.
Specifies PS communication protocol
mode of data from OkiLAN 7300e .
(In RAW mode, Ctrl-T is invalid.)
Item Value Description