Oki 7100 Printer User Manual


 
SETTING UP > 33
POWER CONNECTION
1.
Connect the power cable (1) into the power socket on the
printer, then into a grounded power supply outlet.
2.
Switch the printer ON using the main power switch (2).
The printer will go through its initialisation and warm up sequence.
When the printer is ready, the READY indicator comes on and stays on
(green) and the LCD indicates ONLINE.
WARNING!
Ensure both the printer power switch and the AC supply are switched
OFF before connecting the power cable.
NOTE
After installing the new toner cartridges, the message TONER LOW or
CHANGE TONER may appear on the display. If this message does not
disappear after a few pages have been printed, reinstall the appropriate
toner cartridge.
1
2