Filter
Top Products
ACCESSORIES > 193
ACCESSORIES
NETWORK INTERFACE CARD
The network interface card is an Ethernet board that supports
EtherTalk, TCP/IP, IPX/SPX, IPP, SNMP, NDS and NetBEUI protocols. It
can be connected using 10/100BASE-TX.
1.
Turn off the printer and disconnect the power cable.
2.
Loosen the two screws and remove the cover (1) from the
lower option slot.
3.
Insert the network interface card (2) into the option slot and
secure with the two thumbscrews (3).
4.
Connect the power cable and switch on the printer.