Filter
Top Products
20
2
Printing
Banners
Printing on fan-fold banner paper can only be done
using a software package which fully supports this
feature, such as Corel Draw
®
. Some software
packages may allow you to select “banner” printing,
but only work if you feed in single sheets of paper
then tape them together to form the banner.
To load fan-fold type banner paper:
1. Place the stack of paper behind the printer.
2. Push the paper support back down into the paper tray.
3. Adjust the paper guides for the width of the banner paper,
then carefully insert the leading edge of the banner into the
paper tray.
Other Media
Transparencies, sheets of labels, iron-on transfer media, etc.
are loaded in the same way you load paper (side to be printed
facing the paper tray): see page 10, ff.
For print media specifications, see Section 6.
Before printing, make sure you have the appropriate print
media and media size selected (see page 9): to select the
media, go to the Main tab of the OKI OKIJET 2500 printer
setup dialog box; to select the media size, go to the Page tab
of the OKI OKIJET 2500 printer setup dialog box (see page
15).