Filter
Top Products
32
4
Control panel
Resume/FF Button
Function Action
Resume printing. If the printing has paused, press and
release.
Form Feed. Press and release.
Eject paper. Press and hold for 2 to 5 seconds.
Clear error (Error LED lit). Press and release.
Print Demo page. Make sure:
1. Paper is loaded.
2. There are no print jobs in progress.
3. There is no paper in the print path.
Then press and hold the Resume/FF
button for 2 to 5 seconds.
Print Test page. 1. Turn off the printer.
2. Press and hold the Resume/FF
button while turning the printer
back on.
The test page prints and the printer
returns to the on-line state.
Cartridge Change/Clean Button
Function Action
Change ink cartridge(s). With the power on, press and release.
(See the label inside the printer cover,
or the instructions under “Replacing the
Ink Cartridges” in Section 3 of this
manual for instructions on changing ink
cartridges).
You can change cartridges during
printing by pressing the Cartridge
Change/Clean button, but doing
so may affect the print quality.
Clean the ink jet nozzles. With the power on, press and hold the
button for 2 to 5 seconds.
You can clean cartridges during
printing by pressing the Change
Cartridge/Clean button. When
the printer finishes printing the
current line, it ejects the sheet, and
cleans the cartridge, then inserts a new
sheet of paper and resumes printing
where it left off.