Filter
Top Products
78
E
Error display
The following error window appears when an error is detected
with the FlashPath.
The message in the error window differs according to the
situation.
[When the battery power is low]
“The FlashPath in drive a: has a low battery. The inserted
SmartMedia has been made read only.”
[When the SmartMedia is not inserted in FlashPath or it is
inserted improperly]
“The SmartMedia cannot be accessed. Please eject the
FlashPath in drive a: and be sure that the SmartMedia has
been inserted properly.”
[When FlashPath is in shutdown mode for battery power
saving]
“The FlashPath has powered off to save its batteries.
Please eject the FlashPath from drive a: and re-insert it to
turn it back on.”
[When the internal format of the SmartMedia is
incompatible with the equipment]
“The logical filing system on the SmartMedia is
unrecognized. This SmartMedia cannot be used with
FlashPath.”