Filter
Top Products
98
E
“Read error: Check FD adaptor, battery and Smart
Media.”
Check if the FD adaptor battery is installed properly and if the
SmartMedia disk is inserted properly.
“File cannot be read.”
Check if the FD adaptor battery is installed properly and if the
SmartMedia disk is inserted properly.
“Existing file cannot be erased. Change the file name and
restart from the beginning.”
This error occurs when an existing file which has the same file
name as the copied file and cannot be overwritten is found
when saving files to the computer’s hard drive. Change the
name of the existing file and retry saving the copied file.
“File cannot be created due to a problem with the
volume.”
This error occurs when data cannot be saved at the selected
location on the hard drive. This could be because there is not
enough space available, write protection is enabled, or the
disk is damaged. Once you have determined the cause of the
error, and applied an appropriate countermeasure, try saving
again.