Filter
Top Products
Page 7 - 9
TroubleshootingObit™ 2000 Operation and Maintenance Manual
© GBC Films Group January 2001
7.3 Feeder troubleshooting
WARNING
WARNING: Operator maintenance and operator adjustments may be performed
only by person(s) trained in all aspects of the equipment.
1. The table move is sluggish even without paper load.
WARNING
CAUTION: Depress the emergency stop button before checking for chain tension!
WARNING
CAUTION: Do not wear ties, loose fit clothing or dangling jewelry. These items
can get caught by moving parts while performing tasks.
Check the tension of each chain, and adjust properly. Clean or lubricate leading spindles.
2. The automatic operation is not consistent.
WARNING
CAUTION: Only a qualified service technician may correct this fault.
Check the micro switch inside the feeder, check for loose wires and the contactor in the electrical
cabinet.