Filter
Top Products
Page 7 - 10
Troubleshooting
© GBC Films Group January 2001
Orbit™ 2000 Operation and Maintenance Manual
7.4 Misfed sheets troubleshooting
WARNING
WARNING: Only person(s) trained in all aspects of the equipment may
perform any troubleshooting procedures.
PROBLEM FIX
• Paper is not acclimatized – Feed at lower speed
• Incorrect vacuum or pressure – Adjust vacuum &/ or pressure
WARNING
WARNING: Press the stop button before performing any troubleshooting!
PROBLEM FIX
• Sheets are sticking – Ream needs fanning
• Side stacker plates are tight – Adjust for a slight gap
• Suctions cups are plugged – Clean the suction cups
• Suction cups are not picking up – Replace the dry or worn
the sheets suction cup(s)