Filter
Top Products
Page 1 - 28
Safety Orbit™ 2000 Operation and Maintenance Manual
© GBC Films Group January 2001
1.15 Safety - Rules for Snapping assembly/ chain/ belt drive
maintenance
The chain and belt drives are protected by a fixed cover and is located on the opposite side from the
operator. For safe work, the following safety rules should be followed:
1/
WARNING
WARNING: Turn power off at the main breaker before tentioning the chains or belts.
2/
ATTENTION
Operator maintenance for the chains and belts are limited to lubrication and
tentioning. All other work must be performed by a qualified technician.
3/
ELECTRICAL
SHOCK
Do not modify any guards, covers or enclosures. Contact with any
moving parts or/ and electrical voltage can result in injury or death!