Filter
Top Products
Page 5 - 14
Operations
© GBC Films Group January 2001
Orbit™ 2000 Operation and Maintenance Manual
Feeding small sheet sizes
WARNING
WARNING: Press the stop button before performing the following set-up procedure!
To feed small sizes of paper sheets, less than the distance between the outside suction cups ( n ),
you must loosen the screw ( o ) and rotate the two outside suction cups ( n ) 90 degrees forward then
secure in place by tightening the screws ( o ). This is necessary to prevent the outside suction cups ( n )
from colliding with the side stacker guides and to not waste vacuum power on suction cups not in contact
with the paper pile.
n
n
o
90
o