Filter
Top Products
Page 5 - 15
OperationsOrbit™ 2000 Operation and Maintenance Manual
© GBC Films Group January 2001
5.2.4 First gate
WARNING
CAUTION: Only a qualified service technician may adjust the first gate.
The first gate assembly is calibrated at the factory and may be field calibrated by a qualified
service technician only. Refer to Section 8 Maintenance.
Function of the first gate
The first gate ( a ) positions the paper ream so that the front is always vertical. While the head is
moving forward, the first gate will tip so as to not interfere with the paper feeding.
a