Filter
Top Products
Page 5 - 21
OperationsOrbit™ 2000 Operation and Maintenance Manual
© GBC Films Group January 2001
5.2.6 Second gate
WARNING
CAUTION: Only a qualified service technician may adjust the second gate.
The second gate ( a ) rigisters the sheet and drops out of the way releasing the sheet so that the
overlap of the individual sheets are within the required limits of +/- 1.5 mm.
Position of the second gate
The top edge of the second gate ( a ) must exceed the height of the guide plate ( b ) by 2.3 to 2.7
mm.
a
b
2.3 - 2.7
mm