Filter
Top Products
Page 1 - 14
Safety Orbit™ 2000 Operation and Maintenance Manual
© GBC Films Group January 2001
1.7 Safety - Rules for the snap roller area
It is not possible to cover the entire zone around the snapping roller because of the operation of the
machine. It is therefore necessary to observe the following safety rules:
1/
WARNING
CAUTION: Do not adjust the regulating screws of the snapping roller while the
laminator is in operation. During operation the regulating screw handle is moving and
your fingers may be crushed between the regulating screws and the Plexi-Glass cover.
2/
WARNING
CAUTION: Do not place your fingers or any other part of your body near the contact
point between the upper and lower snap rollers.
3/
ATTENTION
During operation, the plastic cover must remain in the fully closed position.
4/
WARNING
CAUTION: Open the plastic snap roller guard fully to prevent accidental
closing onto your hands or fingers.