Filter
Top Products
Page 5 - 19
OperationsOrbit™ 2000 Operation and Maintenance Manual
© GBC Films Group January 2001
Sheet misfeed sensor
The sheet misfeed sensor protects the supporting laminating roller from the laminating adhesive.
Check its function daily.
To check the sensor, follow the procedure below.
1/ Take a single sheet of paper, insert it under the sensor ( l ).
2/ Block the sensor repeatedly by sliding the sheet of paper in and out from under the sensor.
3/ The proper function is signaled by the sensor LED, which lights up accordingly.
l
WARNING
CAUTION: Only a qualified service technician may repair the sheet overlap sensor.