Filter
Top Products
Page 5 - 3
OperationsOrbit™ 2000 Operation and Maintenance Manual
© GBC Films Group January 2001
5.1.2 The control panel
Legend
1. Push button - start
2. Push button - stop
3. Speed indicator
4. Potentiometer - speed adjustment by means of the main motor
5. Push button - feeder table UP
6. Push button - feeder table DOWN
7. Push button - pressure roller UP
8. Push button - pressure roller DOWN
9. Laminated sheets counter
10. Temperature regulator of the chrome roller deg C/ deg. F
11. Indicator of missing sheets
12. Switch for changing heating zones on the chrome roller
13. The pulling roller switch, UP/DOWN
14. The cutter drive switch ON/OFF
15. Push button for pulsing the snapping assembly
16. Snapping drive switch
17. Potentiometer - snapping drive speed adjustment
18. Push button - reverse drive
19. Push button - emergency stop
20. Push button - stepping run (slow drive for equipment cleaning)
Please refer to the control panel diagram that resembles your machine on pages 4 and 5.
INFORMATION
The overlay has changed but the functions have remain the same.