Filter
Top Products
Page 1 - 19
SafetyOrbit™ 2000 Operation and Maintenance Manual
© GBC Films Group January 2001
1.9 Safety - Rules for the position adjustment of the decurling
bar
During lamination internal stress develops between paper and the chrome roller. The decurling
bar straightens the sheets before they exit the lamination section. During adjustment of the bar, the
following safety rules must be observed:
1/
WARNING
CAUTION: Exercise caution while loosening the decurling bar handle.
The securing screw and the edge of the groove on the regulating
wheel may collide during sudden loosening.
2/
WARNING
CAUTION: Exercise caution while adjusting the control lever position.
During sudden change in the position of the control lever, the set-up
lever of the decurling bar may be hit.
3/
WARNING
CAUTION: Do not place your fingers near the groove on the regulating
wheel while changing the position of the decurling bar.
4/
WARNING
CAUTION: Due to heat eminating from the chrome roller and pressure
roller area, avoid contact with the decurling bar.