Filter
Top Products
Page 5 - 36
Operations
© GBC Films Group January 2001
Orbit™ 2000 Operation and Maintenance Manual
To change the from R2 to R3 and vice versa,
follow the steps below:
1/ Remove the four 8 mm bolts ( a ).
2/ Turn the decurling bar ( b ) with the
desired radius up.
3/ Replace the four 8 mm bolts ( a ).
Effects of the decurling bar
The sheets should lay flat when exiting the snapping rollers and are collected on the stacking
table.
Stacking table
Correctly decurled sheets Incorrectly decurled sheets
Stacking table
R3
R2
a
b